Everyday

Everyday Math: Percentages, Tips and Loan Payments

A sign says 20 percent off, a bill arrives with a tip line, and a dealer quotes a monthly payment with no mention of the total. Each of these is a small calculation, and getting them right is the difference between a quick sanity check and taking someone else's number on trust.

This guide shows the arithmetic behind the three situations that come up most: percentages of all kinds, tipping, and the payment on a fixed-term loan. Every example uses numbers you can verify yourself, and the final section explains what a calculator will not tell you, so you know when to ask for more detail.

Percent of a number

Percent means per hundred, so 15 percent is 15 out of every 100, or 0.15. To find a percentage of a number, convert the percent to a decimal and multiply. Fifteen percent of 80 is 80 times 0.15, which is 12.

Mental shortcuts help. Ten percent is the number with the decimal point moved one place, so 10 percent of 80 is 8. Five percent is half of that, which is 4, so 15 percent is 8 plus 4, or 12. One percent is the decimal moved two places. Combining these gets most everyday percentages without a calculator.

The reverse question is what percent one number is of another. Divide the part by the whole and multiply by 100. If 18 of 60 survey answers said yes, then 18 divided by 60 is 0.3, which is 30 percent. Be careful to divide by the whole, not by the other number you happen to have.

Percent change, and why up and down are not symmetrical

Percent change compares a new value with the starting value: subtract old from new, divide by old, multiply by 100. A rent that goes from 40 to 50 rose by 10, and 10 divided by 40 is 0.25, so it increased 25 percent.

Now reverse it. If a price falls from 50 back to 40, the change is negative 10, divided by the old value of 50, which is negative 20 percent. The same 10 units is a 25 percent rise in one direction and a 20 percent fall in the other, because the starting value differs each time.

This is also why stacked percentages do not simply add. Increase 1,000 by 10 percent to get 1,100, then cut that by 10 percent and you reach 990, not 1,000. Each percentage applies to a different base, so two changes of equal size in opposite directions leave you slightly behind.

Percent of:        80 x 0.15 = 12
Part as percent:   18 / 60 x 100 = 30%
Percent change:    (50 - 40) / 40 x 100 = +25%
                   (40 - 50) / 50 x 100 = -20%
Up then down:      1,000 x 1.10 x 0.90 = 990

Working backward from a final price

Reverse percentages catch people out. A jacket costs 64 after a 20 percent discount. The tempting move is to add 20 percent back to 64, but the discount was taken from the original price, not from 64. After a 20 percent discount you pay 80 percent of the original, so divide by 0.80: 64 divided by 0.80 is 80.

Sales tax works the same way. If a receipt total is 108 and the tax rate was 8 percent, the price before tax was 108 divided by 1.08, which is 100. Whenever you know the result of a percentage change and want the starting value, divide by one plus or minus the rate instead of applying the percentage a second time.

Tipping math you can do in your head

A tip is just a percentage of the bill, so the same shortcuts apply. Customs differ by country, and by service type, so check local norms rather than assuming one standard rate. In the United States, 15 to 20 percent of the pre-tax bill is a common range for table service, though some people tip on the total.

Suppose a bill is 62.40 and you want to leave 18 percent. The tip is 62.40 times 0.18, which is 11.232, so about 11.23. The total is 62.40 times 1.18, or 73.632, which rounds to 73.63. Split four ways, each person pays 18.41 to the nearest cent. Rounding each share up slightly is normal, and it means the group collectively leaves a small extra amount.

For a quick estimate, take 10 percent by moving the decimal, then add half again for 15, or double it for 20. On 62.40, 10 percent is 6.24, so 15 percent is about 9.36 and 20 percent is about 12.48. The ELDOSA tip calculator takes a bill and a percentage and returns the tip and total, which is handy for checking your mental figure.

How a fixed-term loan payment is built

A typical installment loan has a fixed payment every month for a set number of months. The lender charges interest each month on the balance still owed, so early payments are mostly interest and later ones mostly principal. The payment is set so that the balance reaches exactly zero at the end.

With a monthly rate r, which is the annual rate divided by 12, a principal P and n monthly payments, the payment is P times r divided by one minus (1 plus r) raised to the power of negative n. Take 20,000 borrowed at 7.5 percent a year over 60 months. The monthly rate is 0.00625, and the formula gives a payment of 400.76.

The first month's interest is 20,000 times 0.00625, which is 125.00, so only 275.76 of that first payment reduces the balance. After 12 payments, the balance is still 16,574.74. Across all 60 payments the total paid is 24,045.54, so the interest cost is 4,045.54.

P = 20,000   annual rate = 7.5%   n = 60 months
r = 0.075 / 12 = 0.00625

payment = P * r / (1 - (1 + r) ** -n) = 400.76
total paid = 400.76 * 60 = 24,045.54
total interest = 4,045.54

Month 1: interest 125.00, principal 275.76
Balance after 12 payments: 16,574.74

Comparing loans, and what calculators cannot tell you

Small changes in rate or term move the numbers in useful ways. On the same 20,000, a 6 percent rate over 60 months gives a payment of 386.66 and total interest of 3,199.36. Keeping 7.5 percent but stretching to 72 months lowers the payment to 345.80, yet raises the interest to 4,897.76. A lower monthly figure often means a higher total cost.

A calculator only does the arithmetic on the inputs you give it. It does not know about origination fees, insurance, taxes, rate changes, payment timing, rounding conventions or whether interest is calculated daily. Quoted rates and the annual percentage rate on an offer can differ for exactly these reasons. Treat calculator results as estimates for comparing options, and rely on the lender's disclosure for the real figures.

The ELDOSA loan calculator estimates a payment from an amount and an annual rate, with the term fixed at 60 months. For other terms, you can use the formula above with a spreadsheet or the scientific calculator.

Tools mentioned in this guide

Frequently asked questions

How do I calculate a percentage increase between two numbers?

Subtract the old value from the new one, divide the result by the old value, and multiply by 100. Going from 40 to 50 is a rise of 10 over a base of 40, which is 25 percent. Always divide by the starting value, not the ending one.

Should I tip on the pre-tax or post-tax amount?

Both are common, and practice varies by place and by person. Many people calculate on the pre-tax subtotal because tax is not part of the service. Using the total gives a slightly larger tip. Check local custom and any service charge already on the bill.

Why is the total I repay more than the amount borrowed?

Interest accrues on the unpaid balance every month, and you pay it along with the principal. The longer the term and the higher the rate, the more interest accumulates. A lower monthly payment from a longer term usually means paying more overall.

Why does my lender's payment differ from the calculator's?

The calculator uses a simplified model with monthly compounding and no extras. Lenders may add fees or insurance, calculate interest by day, use a different payment date, or round differently. Ask for the full disclosure and compare the annual percentage rate and total cost.

More guides